Vanity Top Lengths

Minimum length for vanity top with a single sink: 25"
Minimum length for vanity top with double sink: 60"
Maximum length for vanity top: 98"*

Please specify to nearest 1/4"**

*Note 1: Granite tops not available in lengths over 85".
**Note 2: Vanity top manufacturing process tolerance + / - 1/8"

Determining Size of Vanity Top

Sizing the length of the vanity top requires that you add the total length of the cabinet base plus desired overhang.

Vanity top length = cabinet base length + desired overhang (if any).

Overhang is based on the customer's preference. The standard overhang is usually 1/2" on one or both sides of the cabinet depending on wall location. 

For example:

No Side Walls (Fig. 1)
36" cabinet base, no walls, 1/2" overhang on either side.

Example:
Vanity top length = 36" cabinet base + 1/2" right overhang + 1/2" left overhang = 37" total length (overhang location is dependent on bowl placement)

 


Determine length (no side walls)

Walls on Both Sides (Fig. 2)
36" cabinet base, wall on right and left sides, no overhang is necessary.

Example: Vanity top length = 36" cabinet base + 0" left overhang + 0" right overhang = 36" total length


Determine length (two walls)

Wall on Side of Cabinet (Fig. 3)
36" cabinet base, wall on either side, 1/2" overhang on one side.

Example: Vanity top length = 36" cabinet base + 1/2" overhang on one side = 36-1/2" total length (overhang location is dependent on bowl placement)

*Note: For cabinet bases smaller than minimum length requirements (24" for example) use custom measurement field to enter lesser number up to 1" below minimum length.

 

Home | Contact Us | Warranty | Sitemap
CUSTOMER CARE: 877-765-4783
© 2015 Solieque brand, Masco Cabinetry LLC.